Configuration for Online Service Providers

(Buy it from http://www.voipsupply.com/)

Steps to configure Your SPA-1000/2000/3000

1. If you haven't already done so, sign up for an account at http://billing.mutualphone.com

2. Open a session to the SPA by typing: http://<spa ip address>.
To find out the IP address, please lift up your handset, press **** (voice menu) then press 110#

3. Click "Admin Login" in the upper right hand corner, then click "Advanced"

4. The browser will show a tabbed user interface. Select the Line 1 tab to configure a service for line 1.
Line 2 can also be configured from the Line 2 tab.

Line Configuration:

  • Click "Advanced" at the bottom of the page.
  • Click "Line 1" tab, and enter the following in the available fields:
  • Set Proxy to: sip.winradius.net
  • Set Outbound Proxy to: leave empty
  • Set "Use Outbound Proxy" to: No
  • Set User ID to your assigned your UserName
  • Password: your assigned password
  • NAT Mapping Enable:YES
  • Set "NAT keep Alive" to "yes"
  • Set "Register" to "yes"
  • Set "Register Expires" to 900
  • Set User Auth ID to no
  • Set Display Name to your  assigned UserName.
  • Set Password to your account's password (e.q. YYYYY)
  • Set "Use ObProxy in Dialog" to: no
  • Click "Provisioning" tab, set Provisioning Enable: no
  • Set preferred codec as G.723
  • Press the Submit All Changes at the bottom of the web page

    click on SIP  tab

    NAT Support Parameters
    Handle VIA received: Handle VIA rport:
    Insert VIA received: Insert VIA rport:
    Substitute VIA Addr: Send Resp To Src Port:
    STUN Enable: STUN Test Enable:
    STUN Server: EXT IP:
    EXT RTP Port Min: NAT Keep Alive Intvl:




    5. The Registration State in the Info tab should now display "Registered"


    Recommended Dia lPlan Setting

    (DialPlan can be at t he bottom page of your line 1 or line 2 tab at:
    http://<spa ip address >
    Click "Admin Login", then click "advanced")

    You can copy and paste the below configuration to your sipura:
    (xxxxxx.|1[2-9]xxxxxx.|xxxxxxxxxxxx.|11x)

     

     

     

    If you have had  service like Broadvoice/Lingo/Vonage , and want to take advantage of our service for international calls, you can  set Mutualphone as second provider on Sipura for outgoing.  This will not affect your incoming calls.

     

    upgrade firmware for sipura3000

    The new firmware can be downloaded from
    http://www.sipura.com/Documents/spa3k-2.0.11g.zip

    for this new firmware, you can specify the username to use in the appropriate SIP headers is in the Gateway X field. for example, set advanced---> line 1 ---->gateway accounts----> Gateway 1:

    your_mutualphone_account@sip.winradius.net

    GW1 Auth ID: your_mutualphone_account
    GW1 Password: your_mutualphone_accout password


    then add a item in Dial Plan : 00xxxxxxxxx.<:@gw1>

    ( Make sure you delete the other item starting with 00 in dial plan )


    Then all outgoing calls with 00 will go to mutualphone .

    Must use different accounts for port1 and port2



    •