X-Pro  ( not x-ten) 

NOTE: Do not try to use the # key to send a call as it will be interpreted as part of the phone number. Use the green phone symbol or the enter key instead.

STEP 1:

Press the menu button (found to the right of the "clear" button in the middle of the phone).

 

STEP 2:

Follow the menu, click on:           System Settings -> SIP Proxy -> [Default]

 

STEP 3:

You need to modify only a few parameters from the factory default. They are listed here:

Display Name:  

Enter User Name from mutualphone ( or enter 1234 for test)

User Name: 

Enter User Name from mutualphone( or enter 1234 for test).

Password:  

Enter the password from mutualphone( or enter  1234 for test).

SIP Proxy:  

sip.winradius.net

Domain/Realm:  

SIP.winradius.net

Out Bound Proxy:  

Send Internal IP: 

default

Register:  

default

 

 

 

 

STEP 4

After changing the settings, close the menu window by clicking on the "X" button at the top right of the window.

STEP 5   If the settings are correct, x-pro shows " Logged in,  Enter phone number", then it is ready for you to make calls!   

  ( please disable all codec except G729)

 

Dial 00+CC+number    or  011+CC+number

for example

Dial 0014163503000 or 0012059160021.  you will hear  voice message .